PTFE Needle Felt General Type
PTFE needle felt general type is the main product for producing PTFE filter bags. First of all, 100% virgin PTFE scrim was made by membrane tear PTFE filament yarn. Then PTFE staple fibers were processed by needling process.
PTFE needle felt general type is the main product for producing PTFE filter bags. First of all, 100% virgin PTFE scrim was made by membrane tear PTFE filament yarn. Then PTFE staple fibers were processed by needling process. In the later stage, the process of impregnation or laminating can be done according to the requirements of customers. PTFE needle felt is suitable for harsh environment with high corrosive conditions and high temperature. It has been in the fields of waste incineration, medical waste incineration, thermal power generation and chemical gas filtration.
PTFE Needle Felt Specification Sheet
Air Permability | L/d (M2.min) | Min 90 |
Grams Square Meter | g/m2 | 750 +/-10% |
Warp Ulimate Elongation | @200(N/5cm) | Max 5 |
Weft Ulimate Elongation | @200(N/5cm) | Max 5 |
Warp Tensile Elongation | N/5cm | Min 450 |
Weft Tensile Elongation | N/5cm | Min 450 |
Thickness | mm | 0.6~1.0 |
PTFE NEEDLE FELT GENERAL TYPE
Constituent, 100% PTFE scrim and 100% PTFE fiber.
Average weght, 750 g.m2
Thickness, 1.2 mm
Density, 0.63g/cm3
Air permability, 100L/dm2*min
90 min max contraction @ 260 centi degree, Warp max 3% and weft max 3%.
Working temperature, uninterrupted 240 centi degree and instantaneous 260 centi degree